Here’s an interesting question I received this morning:
“Hey Chris, I had a question about something I’ve been struggling with when taking pictures. In short, how do you get good background blur yet maintain good sharpness in a group shot. I know increasing f stops (or closing aperture) will help but I don’t know what range i want to be in to get uniform sharpness through the group and blur the background. What looks good on the LCD screen isn’t always translating when I upload on my computer. Hopefully, this makes sense and any advice you could provide would be greatly greatly appreciated. I’m really enjoying your posts on your blog and FB. I never realized that setting up shots was so complicated. thanks for sharing your knowledge!
J.
And my response:
“Hey J! Great to hear from you. There are lots of variables when it comes to DOF in group photos…how big a group, what focal length you’re using, and how far away you’re shooting from, for example. My general rule of thumb when doing wedding parties and family shots with 2-3 rows of people is f5.6. Rows of 4 or more I move up as high as f8. I’m usually shooting with a moderate wide angle from 10-15 feet away. (Also remember I’m shooting on a full-frame camera, which is important since you get slightly more depth of field at a given aperture when using a camera with an APS-C sized sensor.) One key to getting the most use out of your available DOF is to focus 1/3 of the way into the group. Logic would have you focus 1/2 of the way in. But DOF doesn’t work that way…there is more “in-focus” room behind your point of focus than in front. So put your focus point on someone 1/3 of the way into the group and you’ll be maximizing your available DOF and be able to use a smaller aperture to still get everyone in focus. (And another tip is to position your group as far away from the background as possible.) There will definitely be some variations between your cameras LCD and your monitor…like brightness and color temp. However, DOF should NOT be one of those. If there is a difference, it’s probably just because your camera’s LCD doesn’t have enough detail to properly show exact DOF. Do you have a DOF preview button on your camera? Try using that if you have enough available light to see the image at that dim an aperture. Hope all his helps. Cheers!”
Here’s a group photo I did yesterday for
Anchor Commercial’s holiday greeting card they sent out to all their clients. Nothing fancy, but it’s got enough DOF! š
Here’s the “before” without the SB-800. I had a slight warming filter on the remote flash and triggered it via a set of Radio Poppers. They were shot with a Nikon D3 and 70-200 f2.8.
